PCE Instruments PCE-WSAC 50+ 24 Environmental Meter with RS485 Interface

Environmental Meter / pre-alarm and alarm / RS485 interface / wind speed display / with data logger / display of average speed over the last 2 and 5 minutes

The Environmental Meter can be used in various fields of application. In use, the wind speed meter with cable and data logger 24 V starts measuring even the slightest wind movements. On the one hand, the wind speed meter can be used to monitor the current wind speed. On the other hand, it is also possible to use the wind speed meter with cable and data logger 24 V to measure average values for the last two or five minutes. If the wind speed values are higher than the pre-set values, a pre-alarm is activated before the alarm is triggered. Both alarms are emitted visually and audibly on the Environmental Meter. If the pre-alarm is activated, a yellow LED will flash on the front of the device and a beeper will emit a periodic warning tone. If the regular alarm needs to be activated, the red LED will flash and the device will beep continuously.In general, the wind speed meter is used wherever wind monitoring is required. This is often the case in factories, mines, wind turbines and the like. If required, a relay can also be connected to the Environmental Meter. In addition to the low wind speeds, the wind speed meter is characterised by its high reliability and high accuracy.

Features:

• 2 alarm types
• supply voltage: 24 V AC
• input signal: 4...20 mA
• communication: RS485
• 2 alarm relays installed
• integrated beeper for alarming
• sensor supply via evaluation unit

Includes:

• 1 x Environmental Meter PCE-WSAC 50+ 24
• 1 x 8 GB microSD card
• 1 x user manual
• 1 x sensor plug