Weber Sensors 3302.13/8 In-Line Vent-Captor, 24 VDC, Transistor Sswitching PNP n.o., 2 m Oilflex Cable, 8 mm Stainless Steel Tubing
- Part #:3302.13/8
- Condition:Brand New
The vent-captor is ideally suited for use in automation processes or other industrial applications where gaseous media must be monitored. Is an "inline model" specially designed for installation in operating systems with small pipe diameters. The sensor operatesaccording to the calorimetric measuring principle. Detection takes place in the inline tube whereby the sensor reads the flow velocity of the medium and converts it into an electrical signal.
Features:
- for small pipe diameter
- high switching accuracy and reproducibility
- temperature compensated
- electronic function without mechanically moved parts
- robust industrial design (special potting)
- ISO 9001:2015
- Specification Sheet
- Manuals/Tutorials
- You May Also Like
- Your Recently Viewed
- Reviews
- Q&A
| Medium | Gaseous |
| Measuring Range | 0.5 - 20 m/s |
| Set-Point Adjustment | Stepless over entire measuring range |
| Switching Hysteresis | < 20 % |
| Switching Delay | Approx. 2 sec. when flow exceeds or falls below set-point by more than 2 m/s |
| Repeatability | < 3 % |
| Medium Temperature | -20 °C to +70 °C |
| Ambient Temperature | -20 °C to +70 °C |
| Pressure | Max. 10 bar |
| Temperature Drift | < 0.3 % / K |
| Protection Rating | IP65 |
| Sensor Pipe Material | Stainless Steel AISI 316 |
| Pipe Dimensions | 8 x 1 mm (OD x wall thickness) |
| Torsion | No torsion allowed between pipe and housing |
| Sensor Probe Material | Ceramic, platinum with overglaze |
| Housing Material | Makrolon |
| Electrical Connection | 2 m oilflex cable, 3 x 0.5 mm2 |
| Electrical output | 0.13 |
| Switching condition with flow > switching point | energized, switched |
| LED | green |
| Switching condition with flow < switching point | currentless, not switched |
| LED | red |
| Supply voltage | 24 VDC (18 to 30 VDC incl. residual ripple) |
| Power consumption | approx. 800 mW to 2.4 W |
| Switching current | 0 - 400 mA |
| Circuit protection | reverse polarity |
| Output protection | short circuit and overload, pulsing |
| Operational readiness | after approx. 10 sec. |
| Set-point adjustment | 18 turn potentiometer |
| Note: all data related to air at atmospheric pressure | |
Leave a review of this product!
If you've used this product, please leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. Please contact us for more details.
Write a text review
Earn $2.00Post a product photo
Earn $4.00Post a product video
Earn $10.00