PIE PIE 820PM Panel Mount PIE 820 Multifunction Calibrator with AC Adapter, Mounting Plate, Screws and NIST Cert.

Calibrator functions include:

• Calibrate milliamps and voltage
  • Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mV
  • Read to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mV
  • Simulate 2 Wire transmitters
  • Power up transmitters and loops with built in 24 V power supply
  • Simplify HART hook ups with built in 250 ohm resistor
• Calibrate directly in temperature (°C & °F)
  • Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II)
  • RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
  • Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm
  • Resistance up to 4010 ohms
• Checkout flow and vibration systems
  • Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99
  • Hz, 9999.9 Hz, 20.000 kHz

Calibrator features include:

• Technician friendly operation
  • Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as hand held models
• Quickly set any three outputs plus automatic stepping & ramping
  • Set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK™ switch
  • Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span
  • Select RAMP to smoothly increase and decrease the output between Zero and Span
  • Set step/ramp time to match your system from 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 and 60 seconds
• Easily recall stored values
  • Use the EZ-CHECK™ switch to recall the HI and LO values automatically stored when in READ mode

Included with each unit

• Rugged painted aluminum mounting plate with mounting screws
• 110/120V AC adapter
• NIST calibration certificate

Datasheet