Fogmaster 418020-590 Sewr-Jet Fogger Power Head with Hose and Nozzle Assembly 15', 240V
- Part #:418020-590
- Model #:Sewr-Jet
- Condition:Brand New



Sewr-Jet Fogger Power Head with Hose and Nozzle Assembly, 15', 240V
The remote discharge of the Sewr-Jet™ makes it ideal for odor control in hard-to-reach locations. Its tiny fog particles, with their vast surface area for efficient gas contact, provide high removal rates at low chemical cost.
The anti-siphon design and corrosion resistant nozzle of the are particularly suited for such below-grade applications as sewer lift stations and holding tanks. The nozzle may be suspended from above, attached to a pit cover, or mounted through a side wall.
Like all drum mounted units, it's a breeze to set up. Just screw the power head into your chemical container (it fits the standard bung openings of 30 and 55 gallon drums), adjust the valve for desired particle size (anything from a dry fog to a wet mist) and aim the output.
The is well suited for maintenance and repair operations -- portable, reliable and easy to care for. Just hose off the nozzle between jobs, clean the intake filter as needed, and change motor brushes when they wear out (600 hour estimated lifetime).
- Specification Sheet
- You May Also Like
- Your Recently Viewed
- Reviews
- Q&A
| Motor | 1 Hp, 50/60Hz 240V, 3.5 amp MS™ motor saver brushes standard |
| Motor Brushes | Motor brushes are a wear part and must be replaced when worn (estimated life - 600 operating hours). Product includes standard MotorSaver™ brushes to protect commutator as brushes reach end of life. |
| Blower | Balanced fan, 2 stage, 20,000 rpm (no load) |
| Fogging Nozzle | High shear, counter rotating vortex. Non-clogging design (no tiny orifices). Fog on-off control valve (option; inquire of factory). |
| Hose | 15' lengths. A low pressure transfer pump is required when the fogging nozzle is higher than its native suction lift (about 6 ft above the base of the drum). |
| Particle Size | 7-30 micron VMD, adjustable |
| Liquid Flow Rate | 0-9 oz/min [0-270 cc/min] under native suction lift. Otherwise, limited only by pump capacity. Nine turn vernier control/memory lock. |
| Chemicals | Handles both oil- and water-based chemical solutions. (Liquid viscosity and density affect particle size distribution) |
| Liquid Reservoir Capacity | Attaches to the standard bung opening of most 15-, 30- or 55-gallon chemical drums. The DM fogger includes the drum adapter as shown, but not the drum itself. |
| Materials of Construction | Power head housing and drum adapter - aluminum Tubing - fuel and oil resistant vinyl Fittings - brass Flow control valve - glass filled nylon, stainless stem, Viton® seal Hose - vinyl Nozzle assembly - Celcon® w/ vinyl housing Hose clamps and mounting hardware - stainless |
| Regulatory Compliance | UL, CSA, CE, PSE |
| Dimensions | H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm] |
Leave a review of this product!
If you've used this product, please leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. Please contact us for more details.
Write a text review
Earn $2.00Post a product photo
Earn $4.00Post a product video
Earn $10.00

