Aloris AT-20 Adjustable Knurling Holder, 1"

Features:

• Mounts into tool slot on CNC turrets easily adjustable with knurls installed the range is 1/8"-2".
• Opposing forces on knurls create little or no force on the machine. Just remove the two knurl lock screws, replace with bar grippers and use as a heavy duty bar puller.
• There are no gripper springs to remove when changing bar diameters.
• Just loosen the lockscrew, insert allen wrench and dial to the next size, preload approximately 1/8 rev., lock locking screw.
• Furnished with 1" shank without knurls or grippers.
• Minimum clearance required between turret and covers is 3-3/8.