Sonel WMUSMPI530IT MPI-530-IT Multi-function Meter

  • Part #:WMUSMPI530IT
  • Condition:Brand New
0 Reviews Write a Review
Sonel WMUSMPI530IT MPI-530-IT Multi-function Meter
Sonel WMUSMPI530IT MPI-530-IT Multi-function Meter
Sonel WMUSMPI530IT MPI-530-IT Multi-function Meter
Sonel WMUSMPI530IT MPI-530-IT Multi-function Meter
Sonel WMUSMPI530IT MPI-530-IT Multi-function Meter
Sonel WMUSMPI530IT MPI-530-IT Multi-function Meter
    • $2,908.62 / Each
  • Free Shipping logoFree Shipping
See product details
3-4 Weeks Factory Lead Time
Check Availability
Quantity:
Technical details
Measurement functionsMeasurement rangeDisplay rangeResolutionAccuracy
Fault loop impedance
Fault loop ZL-PE, ZL-N, ZL-L0.13 Ω ... 1999.9 Ω acc. to IEC 615570,00 Ω ... 1999 Ωfrom 0.001 Ωfrom ±(5% m.v. + 0.03 Ω)
Fault loop ZL-PEin RCD modefrom 0.50 Ω ... 1999 Ω acc. to IEC 615570,00 Ω ... 1999 Ωfrom 0.01 Ωfrom ±(6% m.v. + 5 digits)
Measurements of RCD parameters
RCD tripping test and measurement of tripping time tAmeasuring current 0.5 IΔn, 1 IΔn, 2 IΔn, 5 IΔn
general and short-time delay RCD
TN / TT mains0 ms ... 300 ms0 ms ... 300 ms1 ms±(2% m.v. + 2 digits)
IT mains0 ms ... 400 ms0 ms ... 400 ms1 ms±(2% w.m. + 2 cyfry)
selective RCD0 ms ... 500 ms0 ms ... 500 ms1 ms±(2% m.v. + 2 digits)
Measurement of RCD tripping current IAmeasuring current 0.2 IΔn ... 2.0 IΔn
for sinusoidal residual current (AC type)3.3 mA ... 1000 mA3.3 mA ... 1000 mAfrom 0.1 mA±5% IΔn
for unidirectional residual current and unidirectional with the 6 mA DC bias (type A)3.5 mA ... 700 mA3.5 mA ... 700 mAfrom 0.1 mA±10% IΔn
for direct residual current (type B)2.0 mA ... 1000 mA2.0 mA ... 1000 mAfrom 0.1 mA±10% IΔn
Earth resistance
3- and 4-pole methodfrom 0.50 Ω ... 1.99 kΩ acc. to IEC 61557-50.00 Ω ... 1.99 kΩfrom 0.01 Ωfrom ±(2% m.v. + 3 digits)
3-pole + clamp method0.00 Ω ... 1.99 kΩ0.00 Ω ... 1.99 kΩfrom 0.01 Ω±(8% m.v. + 4 digits)
2-clamp method0.00 Ω ... 99.9 kΩ0.00 Ω ... 99.9 kΩfrom 0.01 Ωfrom ±(10% m.v. + 4 digits)
Resistance-to-earth0.0 Ωm ... 99.9 kΩm0.0 Ωm ... 99.9 kΩmfrom 0.1 ΩmDepending on accuracy of REmeasurement
Insulation resistance
Measuring voltage 50 V50 kΩ ... 250 MΩ acc. to IEC 61557-20 kΩ ... 250 MΩfrom 1 kΩfrom ±(3% m.v. + 8 digits)
Measuring voltage 100 V100 kΩ ... 500 MΩ acc. to IEC 61557-20 kΩ ... 500 MΩfrom 1 kΩfrom ±(3% m.v. + 8 digits)
Measuring voltage 250 V250 kΩ ... 999 MΩ acc. to IEC 61557-20 kΩ ... 999 MΩfrom 1 kΩfrom ±(3% m.v. + 8 digits)
Measuring voltage 500 V500 kΩ ... 2.00 GΩ acc. to IEC 61557-20 kΩ ... 2.00 GΩfrom 1 kΩfrom ±(3% m.v. + 8 digits)
Measuring voltage 1000 V1000 kΩ ... 9.99 GΩ acc. to IEC 61557-20 kΩ ... 9.99 GΩfrom 1 kΩfrom ±(3% m.v. + 8 digits)
Resistance of protective conductors and equipotential bondings
Measurement of resistance of protective conductors and equipotential bondings with ±200 mA current0.12 Ω ... 400 Ω acc. to IEC 61557-40.00 Ω ... 400 Ωfrom 0.01 Ω±(2% m.v. + 3 digits)
Measurement of resistance with low current0.0 Ω ... 1999 Ω0.0 Ω ... 1999 Ωfrom 0.1 Ω±(3% m.v. + 3 digits)
Light intensity
Measurement in luxes (lx)0 lx ... 399.9 klx0 lx ... 399.9 klxfrom 0.001 lxfrom ±(2% m.v. + 5 digits)
Measurement in feet-candles (fc)0 fc ... 39.99 kfc0 fc ... 39.99 kfcfrom 0.001 fcfrom ±(2% m.v. + 5 digits)
Phase sequence indicationin the same direction (correct), opposite direction (incorrect), UL-Lvoltage: 95 V ... 500 V (45 Hz ... 65 Hz)
"m.v." - measured value1-phase power quality recorder:The device is designed to work with mains:
  • with nominal frequency 50/60 Hz
  • with nominal voltage: 110/190 V, 115/200 V, 127/220 V, 220/380 V, 230/400 V, 240/415 V
Supported systems:
  • single-phase
ParameterMeasuring rangeMax. resolutionAccuracy
Alternating voltage (TRMS)0.0 ... 500 V0.1 Vfrom ±(2% m.v. + 2 digits)
Alternating current (TRMS)depending on clamp*0.1 mAfrom ±(5% m.v. + 3 digits) (error does not account for clamp error)
Frequency45.0 ... 65.0 Hz0.1 Hz±(0.1% m.v. + 1 digit)
Active, reactive, apparent and distortion power0 VA ... 1.5 MVA, 0 W ... 1.5 MW, 0 var ... 1.5 Mvar1 VA, 1 W, 1 varfrom ±(7% m.v. + 3 digits)
cosφ and power factor (PF)0.00 ... 1.000.01unspecified
Harmonics
Voltage0.0 ... 500 V0.1 Vfrom ±(5% m.v. + 3 digits)
Currentdepending on clamp*as for alternating current True RMSfrom ±(5% m.v. + 3 digits) (error does not account for clamp error)
THD
Voltage0.0 ... 999.9% (in relation to the first harmonic)0.1%±5%
Current0.0 ... 999.9% (in relation to the first harmonic)0.1%±5% (error does not account for clamp error)
*
  • F-1A, F-2A, F-3A clamp : 0 ... 3000 A AC (10 000 Ap-p)
  • C-3 clamp: 0 ... 1000 A AC (3600 Ap-p)
  • C-6A clamp: 0..10 A AC (36 Ap-p)