Measuring range	Fe: 0 ... 500 µm
	NFe: 0 ... 500 µm
Accuracy	±(1 % of reading + 1 µm)
Resolution	0.1 µm (<100 µm)
	1 µm (>100 µm)
Measurable materials	For measurements on iron/steel and non-ferrous metals
Min. radius of curvature convex	5 mm / 0.19"
Min. radius of curvature concave	25 mm / 0.98"
Min. measuring surface	Ø17 mm / 0.67"
Min. substrate thickness	0.2 mm / 0.008" (on magnetic materials)
	0.05 mm / 0.002" (on non-magnetic materials)
Probe mode	Autom. mode with material detection (Fe + NFe)
	Magnetic mode (Fe)
	Eddy current mode (NFe)

Calibration	Multipoint calibration (1 ... 4 points for each group)
	Zero-point calibration
Units	µm, mm, mils
Data transfer	USB 2.0
Memory	A volatile measuring group (DIR mode)
	Four measuring groups with autom. storage and max. 2000 readings (GEN mode)
Statistical functions	Number of measured values, mean, minimum, maximum, standard deviation
Alarm	Display when the adjustable upper and lower alarm limits are exceeded
Operating time	Autom. shutdown mode (3 min.)
Power supply	3 x 1.5 V AAA batteries
Display	128 x 128 px LCD display
Indicators	Battery status
	Fault detection
Operating conditions	0 ... +50 °C / 32 ... 122 °F
	20 ... 90 % RH non-condensing
Storage conditions	-10 ... +60 °C / 14 ... 140 °F
	20 ... 90 % RH non-condensing
Dimensions	143 x 71 x 37 mm / 5.6 x 2.8 x 1.5" (L x W x H)
Weight	With sensor and batteries: ca. 271 g / 9.5 oz

PCE Instruments PCE-CT 80-FN0D5 Car Measuring Device for Fe and NFe with USB Interface