Lifting Magnets Designed for Thick, Non-Flexing steel sheets and parts.

Creative Lift permanent lift magnets are ideal for handling steel plates, die castings, forgings, etc. They eliminate the need for clamping devices, slings or chains. One person can perform operations previously calling for two or more people.

Features:

The Original Non-Marring Roller Cam Release will easily release parts without gouging your valuable materials
Spring return handle
Less torque required to release load
"Jack Screw" - Secondary Release
Lift capacity clearly stated on magnet
Durable Stainless Steel Casing
Heat Resistant up to 300°F (148°C)
3:1 Design Factor
ASME B30.20 BTH-1 Design Category B Service Class 3

Working Load Limit in lbs & *Maximum Sheet Length Due To Sag For Material Thickness For Single Magnet Use:

3/16" (6') - 800
1/4" (6') - 1100
3/8" (8') - 1800
1/2" (8') - 2700
3/4" (8') - 3000
1" (10') - 3000

Working Load Limit (WLL) Values for the creative Lift Magnets are stated at 33% of the actual value. We recommend when lifting sheets over 8', use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Thin material is susceptible to magnetic bleed through, resulting in two sheets being lifted at once. Round WLL Values are based on ideal conditions. Consult the factory before specifying these magnets for use on round materials. *Max. sheet lengths are selected due to sag characteristics of specified sheet. The item to be lifted must cover the entire length and width of the magnetic poles to properly engage and release the part. CF = Consult Factory, NA = Not Applicable (Magnets will not turn "ON" with stated thicknesses.)

Industrial Magnetics Mag-Mate CL3000 Ceramic Creative Lift Magnet, Working Load Limit 3000 lbs